Φ508 mm PQF連軋管機前臺芯棒回轉臂的傳動改造
Modification of Drive for Inlet Table Rotary Arm of Φ508 mm PQF Pipe Mill
-
摘要: 介紹了Φ508 mm PQF連軋管機前臺芯棒撥入回轉臂的工況要求及設備結構，詳細核算了前臺芯棒撥入回轉臂的電機功率；并闡明了該回轉臂動作過程中的位置與速度設定。對于回轉臂速度設定，首先根據軋制節奏給出回轉臂動作時間，其次根據傳動計算出的電機轉速并結合工況要求來設定；對于加速到的最大速度則按照變頻電機在額定頻率時轉速值折算到傳動軸上的轉速來設定。Abstract: Described in the article are the operation conditions as required for and the equipment structure of the inlet table kick-in rotary arms of the Φ508 mm PQF pipe mill.The electrical motor power for the arm device is calculated carefully for check.And setting of the positions and the speeds as required for the rotary arm movement process are elaborated.The rotary arm speed must be set up with combination of the three elements，i.e.，first the rotary arm movement time that is calculated based on the rolling cycle，then the electrical motor’s rpm as computed as per the arm rotations，and the operation conditions as well.As for how to accelerate the system to the maximum speed，it must be determined based on the drive spindle’s rotation rate as converted from the variable-frequency motor’s rpm under its rated frequency.
下載: