鉆桿摩擦焊接焊縫及熱影響區的組織和力學性能
Discussion on Metallographic Structure and Mechanical Property of Weld and HAZ of Friction-welded Drill Pipe
-
摘要: 對鉆桿摩擦焊接焊縫及熱影響區的組織和力學性能進行了觀察和測定。結果表明,鉆桿摩擦焊接焊縫及熱影響區的結構共分為9個區;管體端熱影響區的邊緣區拉伸強度最低;焊縫的沖擊功最低。建議對焊縫及其熱處理工藝作進一步研究。Abstract: Observed and tested are the metallographic structure and mechanical properties of the weld and HAZ of the friction-welded drill pipe. The results show that the structure the weld and the HAZ contains 9 areas, and that the minimum tensile strength exists in the rim area of the HAZ of the pipe end, while the minimum impact stays with the weld. It is proposed to make further study on the weld itself and the weld heat treatment process.
下載: