通化硕抠家具有限公司

    高級檢索

    中頻感應加熱頂推式熱擴管工藝分析

    Analysis of Intermediate Frequency Induction Heating and Plug Pushing Hot Expanding Process

    • 摘要: 簡述3種熱擴管工藝的特點、優勢；分析中頻感應加熱頂推式熱擴管工藝參數對擴管變形的影響，并指出擴管時應注意的問題。分析認為：中頻感應加熱頂推式熱擴管工藝雖然對整支管坯非同時進行整體加熱，但與整體加熱擴管工藝相比，加熱方式對擴管變形沒有明顯影響；應加強管坯質量和變形區管坯溫度的控制，選擇合理變形參數，擴制后進行整體熱處理，并加強成品鋼管的質量檢驗。

       

      Abstract: Briefed are the characteristics and advantages of three types of hot expanding processes.The influence of the intermediate frequency induction heating and plug pushing hot expanding process on the expanded pipe is analyzed, and notable problems are pointed out.The analysis leads to the following conclusions.A blank is not simultaneously heated on its entire length in an intermediate frequency induction heating and plug pushing hot expanding process, but, comparing to the overall heating and hot expanding process, this heating method has no obvious influence on pipe deformation.The quality of blanks as well as blank temperatures at deforming areas shall be well controlled.Reasonable deforming parameters shall be chosen.Pipes after expanding shall receive overall heat treatment.Quality inspection on finished pipes shall be enhanced.

       

      • HTML全文

    /

    返回文章
    返回