通化硕抠家具有限公司

    高級檢索

    鋼管測量點控制系統的設計與實現

    Design and Realization of Control System for Measurement Points of Steel Pipe Operation Line

    • 摘要: 鋼管精整線測量點設備操作和數據采集通常用工廠可視化軟件實現,但是現有的測量點控制軟件多采用“事件驅動”方式編程,這種方式要求現場檢測信號必須準確?？梢岳霉S可視化軟件中常見的時間循環程序,構建一個主控循環,實現一種“狀態驅動”的編程方法。由于主控循環采用“先讀取,后執行”的方式使用現場信號,因此用這種方法編寫的控制程序顯著地增強了對現場信號的容錯能力,并且程序本身能實現現場信號的全面監控。

       

      Abstract: Normally the equipment operation and data acquisition of measurement points of the steel pipe finishing line are realized via some visual software. However currently-used control software for the measurement point is in most cases programmed with the event drive technique, which requires that the site measurement signals must be accurate. The time circulating program, a common industrial visual software may be used to build up a main control circulation to obtain a "status drive" programming method. Since the site signals are used in a "first fetch, then execute"mode in the main control circulation, the site-signal fault-tolerant capacity of the control program as made with the said programming method is significantly enhanced, and moreover the program itself is able to realize the overall monitoring of the site signals.

       

      • HTML全文

    /

    返回文章
    返回