通化硕抠家具有限公司

    高級檢索

    APIRP 5L3—2014與SY/T 6476—2013中關于落錘撕裂試驗有關規定的對比

    Comparison between Pipe Drop Weight Tear Test Specifications of API RP 5L3—2014 and SY/T 6476—2013

    • 摘要: 對比了APIRP 5L3—2014與SY/T 6476—2013標準中落錘撕裂試驗的適用范圍、試樣制備、設備參數、試驗溫度和試樣評價等主要技術要求。分析認為：這兩個標準在落錘撕裂試驗取樣位置、試驗尺寸、試樣保溫條件和試驗結果評定方面存在較大差異；APIRP 5L3—2014只適用于管線鋼管，對試樣缺口半徑尺寸要求較為寬松，保溫介質為液體，不接受異常斷口的評定；SY/T 6476—2013適用于管線鋼管和制管用板卷、鋼板，對試樣缺口半徑要求嚴格，保溫介質為液體或氣體，規范性附錄B中規定了異常斷口的評定方法。

       

      Abstract: Compared in the article are the major technical requirements for the pipe drop weight tear test as specified under APIRP 5L3—2014 and SY/T 6476—2013，including applicable scopes，specimen preparation，equipment parameters，test temperature and specimen evaluation，etc.Based on the analysis，it is identified that the above mentioned two specifications are obviously different in the main aspects of the drop weight tear test，in terms of sampling location，sample size，samp le heat preservation and test result evaluation.APIRP 5L3—2014 is only applicable to the steel linepipe，featuring relatively loose requirement for specimen notch radium dimension，liquid medium of heat preservation，unacceptance of evaluation for abnormal fracture，while SY/T 6476—2013 is applicable to both the steel linpipe and steel coil and plate for pipe-making，featuring strict requirement for specimen notch radium dimension，liquid or gas medium for heat preservation，and the evaluation method for abnormal fracture as specified in Appendix B.

       

      • HTML全文

    /

    返回文章
    返回