通化硕抠家具有限公司

    高級檢索

    Q345鋼生產雙相鋼無縫鋼管的工藝試驗及成型性能評價

    Technological Tests on Dual Phase Seamless Steel Pipe Made from Q345 Steel and Evaluation of its Forming Performance

    • 摘要: 通過對Q345無縫鋼管進行中頻感應加熱及環形噴水冷卻，得到了鐵素體+馬氏體的雙相鋼無縫鋼管。采用單向拉伸試驗測試鋼管的力學性能，結合鋼管在掃描電鏡和透射電鏡下的微觀組織形貌，分析了臨界區不同退火溫度對雙相鋼無縫鋼管的組織及性能的影響。采用管端擴口試驗方法，對試驗鋼管的成型性能進行評價。結果表明：Q345無縫鋼管通過中頻感應加熱至臨界區退火后，可獲得高強度、高成型性能的雙相鋼無縫鋼管，其中750℃退火后，試驗鋼管的各相分布較為均勻，應力應變曲線呈現連續屈服狀態，強塑積可以達到16 510 MPa·%。

       

      Abstract: By applying intermediate frequency induction heating and spray ring cooling on a Q345 seamless steel pipe, a dual phase seamless steel pipe containing ferrite and martensite is made.Analyzed the influence of different intercritical annealing temperatures on the structure and properties of the dual phase seamless steel pipe. Also evaluated is the forming performance of the testing pipe by the pipe end expanding test.The results of the tests indicate that when a Q345 seamless steel pipe is heated to intercritical temperature by intermediate frequency induction heating and then treated by annealing, a dual phase seamless steel pipe with high strength and high forming performance will be made.For example, after being annealed at 750℃, the testing pipe will have a relatively homogeneous phase distribution, a stress-strain curve showing continuous yielding and a product of strength and elongation reaching 16 510 MPa·%.

       

      • HTML全文

    /

    返回文章
    返回