通化硕抠家具有限公司

    高級檢索

    Assel軋管機芯棒冷卻及后臺設備的改造

    Modifications of Mandrel Cooling System and Outlet Table of Assel Pipe Mill

    • 摘要: 全浮動軋制、后臺傳動的Assel軋管機存在芯棒甩動而易彎曲、后臺荒管和芯棒導向能力不足以及主減速機溫升大等嚴重問題。為此,采用熱態滾動矯直和分段冷卻技術對芯棒冷卻機構進行改進;將主減速機的傳動方式改為單獨傳動,調整荒管導向裝置和改進結構,加大其開閉動作幅度等。改造后,芯棒冷卻不均以及附加彎曲減小,后臺荒管導向能力明顯增強,使用效果良好。

       

      Abstract: Several problems are encountered with the Assel pipe mill featuring full-floating rolling and out-let table-located drive system, including swing-caused mandrel-bending, poor guidance to the shell/mandrel and serious temperature rise of the main gear reducer.Accordingly, a series of modifications are carried out, i.e., modification of mandrel-cooling system by means of hot-rotating straightening and stepped-cooling process;changing the drive type of the main gear reducer into individual drive, and improving the shell-guiding device with a better structure to increase the opening/closing range.Thanks to these measures, the temperature inhomogeneity and additional bending of the mandrel being cooled are mitigated, and the outlet table guidance to the shell is much better than before, resulting in good effectiveness.

       

      • HTML全文

    /

    返回文章
    返回