通化硕抠家具有限公司

    高級檢索

    螺旋縫埋弧焊管成型工藝參數的優化控制

    Optimization Control of SSAW Formation Process Parameters

    • 摘要: 詳細闡述螺旋縫埋弧焊管成型工藝參數的確定，分析1～3號成型輥位置調整的原因及調整的依據及計算方法，并將計算值與實際測量值進行比較。分析認為：螺旋縫埋弧焊管成型工藝參數調整的計算方法合理，理論計算值與實際測量值相差不大，計算準確，能在實際生產中應用。

       

      Abstract: The formation process parameters of SSAW are discussed in details.The reasons，basis and calculation methods for the position adjustments of No.1，No.2 and No.3 forming rolls are analyzed，and the calculated values are compared with real measurements.The analysis indicates that the theoretical values and the real measurements are basically the same，which proves that the calculation method for SSAW formation process parameters is reasonable and accurate，and is applicable in real production.

       

      • HTML全文

    /

    返回文章
    返回