通化硕抠家具有限公司

    影響鋼管3PE防腐層離線拉伸試驗結果的因素分析

    Investigation of Factors Influencing Results of Off-line Tensile Test on 3PE Anti-corrosion Layer on Steel Tube

    • 摘要: 根據鋼管防腐離線檢驗中常用的標準GB/T 1040.2—2006和ASTM D638—2014,介紹3PE防腐層試樣制備、狀態調節等情況,對比3種類型3PE防腐層試樣的拉伸強度,分析影響鋼管3PE防腐層拉伸試驗結果的因素。分析認為:與GB/T 1040.2—2006標準中的IB型、IBA型試樣相比,ASTM D638—2014標準中的Ⅳ型試樣的標距相對較小,保證了試樣防腐層的厚度均勻,同時試樣肩部應力集中小,因此推薦采用。

       

      Abstract: According to GB/T 1040.2-2006 and ASTM D638-2013 which are commonly followed in off-line corrosion test for steel tube,the preparation of 3PE anti-corrosion layer samples and the status adjustments are introduced in the paper.Tensile strengths of 3 types of 3PE anti-corrosion layers are compared,and the factors that affect the results of the tensile tests are analyzed.It is concluded that comparing to IB and IBA samples defined in GB/T 1040.2-2006,Ⅳtype sample defined in ASTM D638-2014 has smaller gauge length,which assures the homogeneity of the thickness of an anti-corrosion layer.Ⅳtype sample also has concentrated shouder stress,so it is recommened for the test.

       

    /

    返回文章
    返回