通化硕抠家具有限公司

    高級檢索

    超深復雜井用非標準規格TP140V套管的開發

    Development of Non-APISpecification TP140V Casing for Service in Extra-deep Complex Well

    • 摘要: 分析超深復雜井套管使用條件和西部某油田勘探開發的特殊需求，設計開發TP140VΦ293.45 mm×23.55 mm規格超高強度石油套管。分析認為：采用中碳鋼設計，加入Cr、Mo和V等元素進行微合金化，利用純凈鋼冶煉技術，并配合合理的熱處理工藝制度，使生產的TP140V套管的力學性能、高溫強度完全滿足設計要求；采用連軋工藝，通過優化不同軋制環節的變形分配量，使TP140V套管管體橢圓度≤0.25%，壁厚不均度≤8%；且抗外擠性能也滿足要求。

       

      Abstract: Analyzed in the paper are the service conditions of the extra-deep complex oil well,and the special requirements as for the exploitation/exploration of a certain oil field in western China.Based on the analysis,the Φ293.45 mm×23.55 mm TP140V extra-high strength oil casing is designed and developed.Details concerning the R&D of the said casing are as follows.The properties and high-temperature strength of the pipe is in full compliance with relevant design requirements owing to such technological measures as carbon steel-based chemical composition and optimized micro-alloying with addition of Cr,Mo and V,adoption of clean-steel melting technique,and proper heat treatment process;and the pipe has high dimension tolerances as ovality ≤ 0.25% and WT unevenness ≤ 8%,and collapse resistance satisfactory to applicable requirement thanks to employing continuous rolling process and optimizing the distributed deformation amounts for different rolling steps.

       

      • HTML全文

    /

    返回文章
    返回