鋼管再加熱爐爐內輥道結構的改進

Structure Modification of Roller Table within Steel Tube Reheating Furnace

摘要: 鋼管再加熱爐內的溫度為800~1120℃,爐內輥道很容易被損壞,同時也易使管體出現黑印、擦傷、粘鋼、凹坑等質量缺陷。分析、對比了幾種結構形式的鋼管再加熱爐輥道在使用中存在的問題及其產生的原因,并對輥道進行了改進。提出了對不同溫度的再加熱爐,應根據輥道的不同使用部位,采用不同的結構和材質以及在使用過程中應注意的問題。

Abstract: Owing to the temperature ranging from 800 ℃ to 1 120 ℃ of the steel tube reheating furnace, damage frequently happens to the inlet/outlet roller tables of the furnace, or to the pipe body to cause such defects as black dot, scratch, steel sticking and pit, etc., getting the pipe fail to meet application requirements. To solve the issue, investigation of the existing problems and their causes concerning several steel tube reheating roller tables with different structures are made. As a result, the roller table is improved. Proposed here are the selection and recommendation of proper material and structures of different roller sections according to reheating furnaces with specific temperature ranges. Also mentioned are some points of the roller table that need care during operation.