時序脈沖燃燒控制技術在回火爐上的應用

Application of Sequential Pulse Combustion Control Technique to Tempering Furnace

摘要: 為了克服鋼管熱處理用回火爐傳統的燃燒控制方式受測量和調節環節的影響而造成的控溫精度偏差較大,爐內溫度場分布不均勻等不足,采用時序脈沖燃燒控制技術來控制回火爐的爐膛溫度。重點介紹了時序脈沖燃燒控制系統的組成、工作原理及動態性能。由于該系統具有控制溫度波動小、節約燃料等優點,因此具有廣泛推廣的價值。

Abstract: The sequential pulse combustion control technique is used to eliminate the shortcomings of the conventional combustion control process for the tempering furnace for steel pipe heat treatment such as big accuracy deviation of the controlled temperature and uneven distribution of temperature field in the hearth which are caused by certain temperature measurement and adjustment operations of the furnace. Detailed in the paper are the main aspects of the sequential pulse combustion control system,including the configuration,operating principle and dynamic performance,etc. Thanks to its advantages such as slight fluctuation of the controlled temperature and less fuel consumption,the said system is worthy spreading.