通化硕抠家具有限公司

    高級檢索

    T91鋼Φ110 mm管坯穿孔工藝生產實踐

    Practice of T91 Steel Φ110 mm Billet Piercing Process

    • 摘要: 針對T91鋼Φ110 mm管坯熱軋穿孔過程中頂頭消耗高、連接接頭脫絲或斷裂及產品出現內折缺陷的問題，提出改進措施。分析認為：通過制定合理的加熱制度，改進鉬基頂頭及連接接頭結構，規范鉬基頂頭操作使用，可實現穩定生產，每個頂頭平均穿孔支數達到363支，小時平均穿孔支數達67支左右，成本大幅下降。

       

      Abstract: Addressing the problems related to the piercing process of T91 steel Φ110 mm billets such as high consumption of plugs,loosing or breaking of plug connections,as well as the inner folds on pierced products,some countermeasures are proposed.It is indicated that by establishing a reasonable heating schedule,improving the structure of the molybdenum based plugs and connections,and standardizing the operation of the plugs,a stable piercing process with significantly lowerd cost can be realized when each plug may averagely pierce 363 billets in total and 67 billets per hour.

       

      • HTML全文

    /

    返回文章
    返回