關于錐形輥穿孔機軋輥轉速對毛管分層缺陷影響的討論

Discussion of Inflaence by Cone Type Piercer Roll Speed on Shell Lamination Defect

摘要: 指出了錐形輥穿孔機也要和桶形輥穿孔機一樣,要重視對穿孔機軋輥轉速的控制。難變形鋼和合金管坯在錐形輥穿孔機上穿孔,毛管的主要質量問題也是分層缺陷;降低軋輥轉速是消除毛管分層缺陷的關鍵;只依靠大輾軋角,不能消除某些合金毛管分層缺陷;通常所說的斜軋穿孔金屬扭轉變形這種“連續”的不均勻變形,不是毛管分層缺陷產生的原因。

Abstract: It is pointed out that like the barrel type piercer process,the control of the cone type piercer roll speed is also very important.The major quality defect as occurring in the cone type piercer process with highdeforming steel and alloy steel is the lamination.The critical measure as taken to eliminate the said defect is to reduce the roll speed.It is emphasized that the lamination defect of certain alloy steel shells can not be eliminated just by "big toe angle",and that the common explanation for the development of the shell lamination is not true that the "continuous" uneven metal deformation,i.e.,the rotary piercing-caused torsional deformation of the metal is responsible for the said defect.