簡析等臂式三輥抱芯裝置的設計

Brief Discussion on Design of Three-roll Mandrel Steadier

摘要: 現行的等臂式三輥抱芯裝置設計方法存在設計周期長、設計精度低等問題。為了優化設計方法,以機械原理為基礎,建立了一種等臂式三輥抱芯裝置數學模型,其結構設計為傳動比為-1的四連桿機構;并利用Matlab優化工具對該模型進行了優化計算。通過優化設計,使等臂式三輥抱芯裝置的實際中心與軋制中心重合度提高,傳動條件改善,設計周期縮短,設備使用壽命提高。

Abstract: The design process of the currently-used equal-arm three-roll mandrel steadier stays with such problems as long design work cycle and low design accuracy,etc. To optimize the said design process,based on relevant mechanical principle,the math model of an equal arm three-roll mandrel steadier with a structure designed as a four linkage mechanism with a drive ratio of-1 is set up. Furthermore,the math model is optimized with the Matlab optimizing tool. Owing to the optimized design,the overlap ratio between the actual center of the above mentioned mandrel steadier and the rolling center is enhanced,the drive conditions improved,the design work cycle shortened,and the service life extended.