通化硕抠家具有限公司

    高級檢索

    調質石油套管管坯的外徑控制和生產工藝的探討

    DISCUSSION ON O. D. CONTROL AND MANUFACTURING PROCESS OF QUENCHED／TEMPERED BLANK PIPES FOR OIL CASINGS

    • 摘要: 介紹了成都無縫鋼管有限責任公司原生產調質石油套管管坯的定徑工藝簡況。通過對N80級石油套管管坯調質前后外徑的多次測試,了解到其外徑脹大的趨勢,提出了相應的外徑控制精度。探討了石油套管管坯調質后熱定徑的工藝情況。結果表明,管坯調質后不經熱定徑,可生產出符合API5CT要求的N80級及以上鋼級的一般高強石油套管;但是,為了獲得高精度外徑的石油套管,并進一步擴大品種,調質后再經熱定徑也是必要的。

       

      Abstract: The paper first briefly introduces the sizing process for quenched/tempered blank tubes for oil casings originally used in the facility of Chengdu Seamless Steel Tube Co.,Ltd. Based on the O.D.expansion rule learned via repeatedly measuring of O.D.of N80 casing blank tubes before and after quenching/tempering,proper tolerance of O.D. control has been set up.Also discussed are the two processes for the tubes,i.e. post-quenching/tempering hot-sizing process and non-post-quenching/tempering hot sizing process.The operational results show that without post-quenching/tempering hot-sizing treatment,it is allowable for producing ordinary hi-strength oil casing pipes of N80 and higher grades up to API Spec.5CT. However,to produce oil casing pipes with high O.D.accuracy and to expand the product-mix,it is still a necessity to get the pipes undergo hot-sizing after quenching/tempering.

       

      • HTML全文

    /

    返回文章
    返回