通化硕抠家具有限公司

    高級檢索

    Φ460 mm連軋管機生產大直徑不銹鋼鋼管的實踐

    Practice of Manufacturing Large-sized Stainless Steel Tube with Φ460 mm Mandrel Mill

    • 摘要: 介紹了Φ460 mm PQF三輥連軋管機組生產TP304不銹鋼鋼管的生產工藝、過程控制要點以及產品質量的情況。根據ASME SA 213/SA 213M—2004標準要求，所有奧氏體鋼管應是以熱處理狀態供貨，且TP304熱處理應加熱至最低溫度1 040℃，并在水中淬火或用其他方法迅速冷卻，在步進爐熱處理線上對鋼管進行了固溶熱處理。生產實踐結果表明：Φ460 mm PQF三輥連軋管機組適合軋制高合金不銹鋼無縫鋼管，且產品的各項技術和性能指標符合ASME SA 213/SA 213M—2004標準要求。

       

      Abstract: Elaborated here in the article are the main aspects of production of the TP304 stainless steel tube with the Φ460 mm 3-roll PQF mill operation line, including the manufacturing process, the tips of in-process control, and the product quality, etc.As required by ASME SA 213/SA 213M-2004, any austenitic steel pipe must be furnished under as-heat treated conditions.And for the TP304 stainless steel tube, it must be heated to minimum 1 040℃, and then quenched with water or with any other process to be quickly cooled down prior to undergoing solid solution heat treatment on the walking beam furnace heat treatment line.The actual production practice shows that the Φ460 mm 3-roll PQF mill is suitable for rolling high alloy stainless steel seamless tubes with all the technical and properties specifications up to the requirements as specified under ASME SA 213/SA 213M-2004.

       

      • HTML全文

    /

    返回文章
    返回