基于均勻磁化的SAWH焊管無級直流在線兩點消磁法
Homogeneous Magnetization-based Infinite DC On-line 2-point Demagnetization Process for SAWH Pipes
-
摘要: 簡要介紹了SAWH焊管的消磁理論和國內常用的消磁方法, 重點介紹了基于均勻磁化的SAWH焊管無級直流在線兩點消磁法, 即在SAWH焊管制造主機后橋設置第一消磁點, 在X射線探傷室設置第二消磁點。采用該消磁法時, 借助于X射線工業電視圖像來精確判別、調整消磁磁場的大小, 從而有效地對SAWH焊管進行消磁, 防止剩磁的反彈, 實現了以簡單的設備和精細化的控制來獲得較理想的消磁效果Abstract: Briefed are the demagnetization theory and the demagnetization processes as commonly used for SAWH pipes. Focused on is the homogeneous magnetization-based infinite DC on-line 2-point demagnetization process for SAWH pipes,which involves setting up the No.1 demagnetization point at the outlet table of the SAWH pipe mill proper,and the No.2 demagnetization point in the X-ray detection room. In case of using this demagnetization process, the demagnetization field size is accurately identified and adjusted via the picture of the X-ray industrial TV, and thus adequate demagnetization of the SAWH pipe is obtained,and rebounding of remanent magnetization is prevented. And in this way,satisfactory demagnetization is realized by means of simplified equipment and fine control process.
下載: