P110套管抗外壓擠毀強度的有限元分析驗證

Verification of Collapse Strength of P110 Casing via Finite Element Analysis

摘要: 采用有限元分析軟件對套管抗外壓擠毀的影響因素進行驗證分析，其中主要分析P110鋼級Φ139.70 mm×7.72 mm規格套管管體的幾何尺寸如外徑、壁厚、橢圓度及管體的機械性能對管體抗外壓擠毀能力的影響；對比模擬結果與實物外壓擠毀試驗結果、二維與三維模擬試驗結果，并分析內壓加載標準大氣壓對模擬結果的影響。分析認為：管體橢圓度和壁厚對管體抗外壓擠毀強度影響明顯，在實際生產中必須加以控制。

Abstract: Relevant factors as affecting the collapse strength of the casing are verified with the finite element analysis(FEA)software, focusing on such factors as the geometric dimensions of the pipe body of the Φ139.70 mm×7.72 mm P110 casing, including O.D., wall thickness, and ovality, and the mechanical properties of the pipe body;Analytical comparisons are conducted with FEA simulation test result and the full scale collapse test result, the 2-D and 3-D simulation test results, and the influence on simulation resuit by the loading of the internal pressure with the normal atmosphere.As a result of the analysis, it is regarded that both the ovality and wall thickness of the casing pipe body produce significant influences on the said collapse strength, which needs to be properly controlled in actual operation.