銑邊機動態調整銑邊寬度的功能實現

Realization of Milling Width Dynamic Adjustment of Edge Milling Machine

摘要: 由于某公司銑邊機左右切削刀盤位置是左右油缸單獨驅動，當成型段更換產品規格，橫焊縫經過銑邊機時，整條焊管線就需要停機，再調整帶鋼銑后寬度參數，這就產生了較多降級管。分析認為：在保持原有機械設備不變的情況下，改進銑邊機銑后寬度調整控制方式，實現了橫焊縫經過銑邊機時左右切削刀盤位置動態調整的功能，有效提高了HFW焊管的收得率。

Abstract: In regard of an edge milling machine of a certain company, since the left cutting tools and the right cutting tools are separately driven by a left oil cylinder and a right oil cylinder, the whole welding line needs to be shut down and the strip steel width after milling needs to be adjusted during size changing at the forming section and when transversal weld passing the milling machine, which results in more degraded tubes.The analysis indicates that, without changing the existing mechanical equipment, by improving the adjustment control method for strip steel width after milling, the function of dynamic adjustment of left and right cutting tool positions is realized when a transversal weld is passing the milling machine, which effectively increases the yield of HFW welding pipes.