通化硕抠家具有限公司

    高級檢索

    芯棒限動速度對荒管尺寸精度影響的有限元研究

    Finite Element Analysis of Effect on Pierced Billet Dimensional Accuracy by Retained Mandrel Speed of MPM Pipe Mill

    • 摘要: 針對限動芯棒連軋管機組荒管尺寸精度控制問題，利用有限元分析軟件MSC.SuperForm開展三維模擬，研究芯棒限動速度與荒管尺寸精度及芯棒軸向力的對應關系。研究結果表明：芯棒速度是影響孔型內金屬不均勻變形和機架間張/推力的重要因素，提高芯棒速度，荒管尺寸精度和機架間張/推力水平明顯改善，但增大了芯棒軸向力。實際生產中，選擇芯棒速度時，要綜合考慮芯棒軸向力與荒管尺寸精度。

       

      Abstract: Addressing the control of the pierced billet dimensional accuracy of the tube as rolled by the retained mandrel mill, the FEA software MSC.SuperForm is adapted to develop 3-D simulation to study the corresponding relationship between the mandrel retained-speed and the pierced billet dimensional accuracy and the mandrel axial force.The study result reveals that the mandrel speed plays a critical role in affecting the in-groove uneven deformation of the metal and the stretch/push force between the rolling stands.Accordingly increasing the mandrel speed will remarkably improve the pierced billet dimensional accuracy and the stretch/push force between the stands, whereas the mandrel axial force will be increased along too.In case of the workshop operation, the mandrel speed should be determined based on a proper balance between the mandrel axial force and the pierced billet dimensional accuracy.

       

      • HTML全文

    /

    返回文章
    返回