通化硕抠家具有限公司

    高級檢索

    Q690E海事起重船主弦桿用無縫鋼管的開發

    Development of Q690E Seamless Steel Pipe for Service as Main Rod of Marine Crane Ship

    • 摘要: 1 600 t級海事起重船主弦桿用Φ630 mm×30 mm規格Q690E鋼級無縫鋼管，一直以來無法順利實現熱軋生產。通過優化鋼種化學成分，使鋼種1 200℃時的熱塑性達到40.8%，有效降低了軋制力及生產難度；控制鋼種的碳當量在0.62%以下，保證了材料的可焊性；生產前進行端部淬火試驗并測量相變點，熱處理采用浸入式淬火，保證了管材的淬透性，熱處理加熱制度為940℃水淬+650℃回火空冷。最終使得產品的屈服強度達到760 MPa以上。

       

      Abstract: It has not been all along realized to smoothly produce the Φ630 mm×30 mm Q690E seamless steel pipe for service as the main rod of the 1 600 t marine crane ship with the hot-rolling process.The rolling force and the operation difficulty are remarkably reduced by means of optimizing chemical composition of the steel to get its thermal plasticity up to 40.8%at 1 200℃;the weldability of the steel is guaranteed owing to the steel carbon equivalent that is well controlled to be under 0.62%;and prior to rolling the pipe, pipe-end quench test is conducted, and the transformation point is measured, and dip quench process employed, thus the hardenability of the pipe is ensured.The heat schedule is 940℃water-quench plus 650℃ tempering-air cooling.Thanks to implementation of all the measures as above mentioned, the yield strength of the said pipe has been finally enhanced to at least 760 MPa.

       

      • HTML全文

    /

    返回文章
    返回