通化硕抠家具有限公司

    高級檢索

    GH4145合金毛細管的穿孔工藝探討

    Discussion on Hot-piercing Process for GH4145 Alloy Capillarity Tube

    • 摘要: 介紹GH4145合金毛細管的生產工藝流程，重點分析其穿孔工藝，指出穿孔工藝的關鍵控制點，并對穿孔工藝進行改進。分析認為：加大皮帶輪尺寸，在管坯尾端焊接長度50～100 mm的碳素管坯，調整穿孔機頂桿小車水平度，將穿孔機導板改為導輥，可降低穿孔缺陷的產生概率，提高穿孔效率和產品成材率。

       

      Abstract: Briefed in the paper is the manufacturing process for GH4145 wrought superalloy capillarity tube,focusing on an in-deep analysis of the piercing process.And the key control points thereof are identified,and accordingly the piercing process is improved.The analysis leads to such as conclusion that,the propobility of piercing defects will be reduced,and the piercing efficiency and the product yield are enhanced by means of increasing the pulley size,welding a 50~100 mm long carbon steel tube onto the GH4145 tube end,adjusting the levelness of the plug bar car of the piercing mill,and replacing the piercer guide shoe with guide roller, etc.

       

      • HTML全文

    /

    返回文章
    返回