Φ180 mm PQF連軋管機組125 mm孔型的設計與開發

Design and Development of 125 mm Pass of Φ180 mm PQF Mill

摘要: 為擴大產品規格范圍，在Φ180 mm PQF連軋管機組原有孔型的基礎上，設計開發125 mm新孔型。以生產Φ73 mm×4.0 mm無縫鋼管為例，介紹產品的穿孔、連軋、定（減）徑機125 mm孔型的設計與開發，描述125 mm新孔型的設計思路、開發過程及試生產情況。生產結果表明：125 mm孔型設計合理，且產品表面質量良好、壁厚精度高；125 mm孔型的成功開發，使Φ180 mm PQF連軋管機組的產品規格范圍下限由Φ114 mm×4.0 mm擴展至Φ73 mm×4.0 mm。

Abstract: To expand the product size range,a new 125 mm pass of the Φ180 mm PQF mill is designed and developed based on the original pass.Taking the production of the Φ73 mm×4.0 mm pipe as an example,the design and development of 125 mm pass for the piercer,the PQF proper and sizing (reducing) mill are described,focusing on the design thinking,the development activities and the trial production.The actual production result demonstrates that the design of the 125 mm pass is reasonable,the pipe surface quality is good,and the WT accuracy is high.The successful development of the 125 mm pass has got the lower limit of the product size range of the Φ180 mm PQF mill enhanced from the original Φ114 mm×4.0 mm up to Φ73 mm×4.0 mm.