鋼管焊縫100%檢測的X射線工業電視檢測方法

X-Ray Industrial TV Detection Process with 100% Coverage for Welded Steel Pipe Seam Inspection

摘要: 分析了X射線工業電視檢測及計算機實時成像裝置,檢測鋼管端部焊縫時存在盲區的主要原因;介紹了鋼管端部焊縫100%檢測的3種方法。實踐表明,在3種檢測方法中,采用改變圖像增強器接收屏幾何尺寸的方法較優,可解決采用遮擋板、遮擋器方法時存在的不足,滿足了對鋼管端部焊縫進行100%檢測的要求。

Abstract: Analyzed are the major causes for the problem that there exists a blind area,when using the X-Ray industrial TV detection system and the computerized real-time imaging equipment to inspect the end seam of the welded steel pipe,there exists a blind area. Three detection methods with 100% coverage for inspecting weld steel pipe end seam are described. Relevant actual operation results show that among the said three methods,the method involving changing the geometric dimensions of the receiving screen of the image intensifier is comparatively the best one. Thanks to this method,the shortcomings as caused by using the sheltering plate or a sheltering device can be eliminated,and thus the requirement of 100% coverage detection of the pipe-end can be met.