通化硕抠家具有限公司

    高級檢索

    石油鉆桿摩擦焊后內沖技術的探討

    Discussion on Internal Punching Process for Friction-welded Oil Drill Pipe

    • 摘要: 根據石油鉆桿內焊環沖切技術要求，結合現場生產經驗，從內沖系統基本結構出發，分別探討了動力、平衡、傳動、沖切、定位功能的實現并提供了參考方案，介紹了各組件主要技術要求及工藝要點，同時總結了工件定位要求、內沖前檢查要求、內沖后檢查要求及一些主要檢測手段。應用效果表明：采用合理的系統結構，通過對內沖技術各要素的控制，可以有效提高內沖一次成功率。

       

      Abstract: Based on the technical requirements for removal of the internal welding ring of the oil drill pipe,the field production experience,and basic structure of the internal punching system,realization of all the functions of the system are discussed,including power,balancing,driving,punching and positioning. And accordingly relevant reference scheme is proposed. Also elaborated here in the paper are the main technical requirements and process tips of each individual unit of the system. Moreover summarized are the work-piece positioning requirement,the pre-punching and post-punching check requirements,and related major inspection/measurement methods. The actual application result shows that the onetime success rate of the internal punching operation can be improved by means of adopting a reasonable system structure and properly controlling of various key elements associated with the internal punching process.

       

      • HTML全文

    /

    返回文章
    返回