通化硕抠家具有限公司

    高級檢索

    GB/T 8162—2018《結構用無縫鋼管》標準述評

    Comment on GB/T 8162—2018 Seamless Steel Tubes for Structural Purposes

    • 摘要: 簡述GB/T 8162—2018《結構用無縫鋼管》新標準的修改情況，從標準的采標及尺寸允許偏差方面與國內外相關標準進行對比，分析新標準增加或刪減的牌號和化學成分、鋼管制作方法、力學性能、鍍鋅層等技術指標，并對GB/T 8162—2018新標準的執行提出建議。分析認為：GB/T 8162—2018標準中刪除的12CrMo、15CrMo、12CrMoV、12Cr1MoV等牌號的產品應按照GB/T 6479—2013、GB/T 9948—2013和GB/T 5310—2017訂貨；GB/T 1591—2018新標準中的修改內容并未在GB/T 8162—2018體現，應對GB/T 8162—2018適時進行相應修改，使不同鋼材產品的要求保持一致，方便下游設計選材。

       

      Abstract: The revision status of the new standard, GB/T 8162-2018 Seamless Steel Tubes for Structural Purposes is briefed here in the article.The said standard is compared with associated domestic and foreign standards in terms of standard adoption and permissible dimension deviation.Major aspects of the newly-revised standard are analyzed, including the types as added or expurgated, and the technical indexes like chemical compositions, mechanical properties and galvanlized coating etc.Accordingly suggestions are also put forward for implementation of the revised GB/T 8162-2018.It is concluded via the analysis that for purchase of products with types of 12CrMo, 15CrMo, 12CrMoV and 12Cr-1MoV as removed from GB/T 8162-2018, Standards GB/T 6479-2013, GB/T 9948-2013 and GB/T 5310-2017 should be followed.The contents as revised in the new GB/T 1591-2018 have not been reflected in GB/T 8162-2018.It is regarded that GB/T 8162-2018 should be timely and correspondently amended in order to get the requirements for different steel goods keeping consistent with each other so as to facilitate material selection for the down stream design.

       

      • HTML全文

    /

    返回文章
    返回