通化硕抠家具有限公司

    高級檢索

    埋弧焊鋼管焊縫余高的控制

    Control of Weld Bead Remaining-height of SSAW Pipe

    • 摘要: 主要闡述了控制輸送用鋼管埋弧焊內、外焊縫余高的重要性。焊縫的余高大,則焊縫的應力集中系數大,容易形成應力腐蝕裂紋。外焊縫余高大,不利于防腐;內焊縫余高大,將會增加輸送介質的能源損失等。重點介紹了螺旋埋弧焊管內焊縫易出現的“馬鞍形”問題?！榜R鞍形”內焊縫在焊趾處的應力相當大,這對用于輸送腐蝕性介質的鋼管是最有害的。為了延長鋼管的服役年限,必須對焊縫余高進行有效的控制。結合生產實際,提出了輸送用鋼管埋弧焊焊縫余高的控制措施。

       

      Abstract: Elaborated is the importance of controlling both inner and outer weld bread remaining-height of the SSAW linepipe.The bigger the weld bread remaining-height is,the bigger the weld stress concentration factor will be,thus the easier for the stress corrosion crack to develop.Big outer weld bread remaining-height will reduce corrosion prevention effectiveness,while big weld bread remaining-height will bring about more energy loss of the transport medium.The paper focuses on the problem of the so-called "saddle-shaped" inner weld bread of the SSAW pipe,emphasizing that at the foot of such kind of weld bread,the stress is enormously big,which is harmful to the pipe for transporting corrosive medium.To prolong the service life of the steel linepipe,it is necessary to properly control the said weld bread remaining-height.Based on relevant production practice,measures for control of the weld bread remaining-height of SSAW linepipe are proposed.

       

      • HTML全文

    /

    返回文章
    返回