通化硕抠家具有限公司

    高級檢索

    管道環氧涂層固化度與玻璃化轉變溫度關系的研究

    Study on Relation between Curing Degree of Epoxy Coating and Glass-transition Temperature of Pipeline

    • 摘要: 針對國內油氣輸送用熱煨彎管雙層熔結環氧粉末外防腐標準中取消環氧粉末固化度，改用兩次試驗條件下加熱測得的涂層玻璃化轉變溫差值ΔTg來評價涂層的固化情況，指出ΔTg不能直觀地計算得出，有必要研究固化百分率與玻璃化轉變溫度的關系。利用DSC掃描儀測定環氧粉末的玻璃化轉變溫度Tg3和Tg4及其差值ΔTg，用涂層固化后剩余焓變計算固化百分率C，然后擬合固化百分率與ΔTg的對應關系。分析結果可直觀反映出玻璃化轉變溫度ΔTg與固化度的關系，對產品制造過程中的質量把控具有指導和推動作用。

       

      Abstract: In the updated applicable national specifications in association with using dual-layer fusion epoxy powder method for outer surface corrosion-prevention of the hot-bend pipe for oil/gas transmission, the concept of epoxy powder curing degree has been removed, instead, the glass-transition temperature ΔTg as measured twice from the heated coating under two testing conditions is used to evaluate the curing condition of the coating.It is pointed out that the ΔTg value can not be directly calculated, and thus it is necessary to study the relation between the cure percentage and the glasstransition temperature is studied.And the glass-transition temperatures of the epoxy powder Tg3 and Tg4 and their difference ΔTg are measured by the DSCscanner.And then thecurepercentage C iscalculated with the enthalpy changeremained after thecoatingiscured, and thecorrespondence between the cure percentage C and ΔTg is fit.And this relation can be directly reflected via the analysis, which can play a quality guiding and promoting role in the manufacturing process of the product.

       

      • HTML全文

    /

    返回文章
    返回