通化硕抠家具有限公司

    高級檢索

    無張力減徑過程中鋼管壁增厚試驗

    EXPERIMENT ON W. T. INCREMENT OF STEEL TUBE DURING NON-STRETCH REDUCING PROCESS

    • 摘要: 在Φ100mm自動軋管機組無張力減徑過程中,測定了鋼管管壁增厚值。測定數據表明:在生產條件下,采用△S=0.0044△D·Sc計算增厚值合理可行;而對于Sc<10mm和15mm>Sc ≥ 10mm的減徑管,應對計算增厚值作適當修正。

       

      Abstract: Steel tube W. T.increment was measured during the operation of non-stretch reducing mill on the Φ100mm plug pipe-rolling line.The resultant data show that under normal operation conditions, it is logical to calculate the gauge increment with equation:△S=0.0044△D. Sc, and that in case of pipe-reducing with Sc<10mm and 15mm>Sc ≥ 10mm, proper correction should be made to the calculated W.T. increment.

       

      • HTML全文

    /

    返回文章
    返回