通化硕抠家具有限公司

    高級檢索

    X80鋼級樁腿支撐管的性能研究

    Study on Performances of X80 Pile Column-supporting Pipe

    • 摘要: 結合JU2000E鉆井平臺樁腿支撐管的使用環境，對國內某公司生產的X80鋼級樁腿支撐管的金相組織、低溫韌性、疲勞性能、抗氫脆、防撞性能、高溫強度、焊接性等進行了研究。分析結果表明：該樁腿支撐管組織均勻，韌脆轉變溫度低于-80℃；焊接性能優良；疲勞極限比達到0.54，疲勞性能優異；氫脆指數≤60%，氫脆傾向較低，在拉伸應變速率為0.002～5 s-1，斷后伸長率∧16%，防撞性能良好；600℃溫度下強度系數為0.70，耐火性能優異。

       

      Abstract: Based on the service conditions of the pipe for supporting the JU2000E drilling platform pile column, performances of the X80 pile column-supporting pipe as produced by a certain domestic company are studied, including metallographic structure, low temperature toughness, fatigue behavior, hydrogen brittleness-resistance, hitting-resistance, high temperature strength and weldability, etc.The analysis result reveals that the said supporting pipe is in possession of such advantages as homogeneous microstructure, ductile-brittle transition temperature as below-80℃, fine weldability, fatigue limit ratio as up to 0.54, excellent fatigue behavior, hydrogen brittleness factor ≤ 60%, low hydrogen brittleness tendency, tensile strain rate as 0.002~5 s-1, percentage elongation after fractare >16%, good hitting-resistance, 600℃ strength factor as up to 0.70, and satisfactory fire resistance.

       

      • HTML全文

    /

    返回文章
    返回