鋼管熱處理過程的“黑匣子”動態溫度測試

Application of Real-time Temperature Measurement with "Black Box" in Steel Tube Heat Treatment Process

摘要: 鋼管在熱處理爐內的實際升溫?cái)?shù)據是準確制定熱處理工藝必需的參數。常規熱處理溫度測試采用如熱電偶、紅外溫度計等,但測試結果都與實際溫度存在較大偏差?！昂谙蛔印睖囟葴y試儀相對來說測溫偏差最小。介紹了耐高溫“黑匣子”測試技術在鋼管連續熱處理爐上的應用。通過對熱處理過程的數字化,分析了“黑匣子”溫度測試在熱處理工藝改進和優化方面的應用情況。

Abstract: It is known that the actual temperature-rise data of steel tube in the heat treatment furnace are the necessary parameters for preparing proper heat treatment process. With conventional measuring devices like thermal couple and infrared pyrometer, etc., the data as measured are so deviated from the actual temperature. Comparatively, the "Black Box" temperature-measuring device is capable of provide the minimum measurement deviation. Application of the measurement technique of the said heat-resistant "Black Box" to the steel tube continuous heat treatment furnace is described here in the article. Based on the digitalization of the heat treatment process, the application of the "Black Box" temperature measurement technique for improvement and optimization of the heat treatment process is discussed.