通化硕抠家具有限公司

    高級檢索

    厚壁直縫埋弧焊管焊縫熔合線夾渣產生的原因

    Causes for Entrapped Slag in Weld Fusion Line of Heavy-wall SAWL Pipe

    • 摘要: 針對在生產X65 鋼級Φ762 mm×30.;
      2 mm直縫埋弧焊管初期焊縫夾渣比例達到20%的問題, 分析了厚壁直縫埋弧焊管焊縫熔合線夾渣產生的原因及焊接工藝參數對焊縫夾渣的影響, 提出了改進措施。經多次試驗及調整工藝參數后, 焊縫夾渣比例降到5%以下, 使焊管返修比例降低, 生產效率大幅度提高

       

      Abstract: Addressing the problem that the initial weld entrapped slag rate of the Φ762 mm×30.2 mm X65 SAWH pipe is up to 20%,the causes for occurrence of entrapped slag in weld fusion line of the heavy-wall SAWH pipe,and effect by welding process parameters on weld-entrapped slag occurrence are analyzed. Accordingly,improvement actions are proposed. Owing to repeated tests and setting of the process parameters,the said entrapped slag rate is reduced to be under 5%,and the pipe rework rate is in turn cut down,and thus the productivity is remarkably enhanced.

       

      • HTML全文

    /

    返回文章
    返回