通化硕抠家具有限公司

    高級檢索

    30Mn鋼調質P110鋼級油管熱處理工藝研究

    Study on Heat Treatment Process for Quenched-tempered 30Mn P110 Oil Tubing

    • 摘要: 根據30Mn鋼的CCT曲線確定出Ac1、Ac3和Ms溫度，在27MnCr調質P110鋼級產品熱處理工藝基礎上，通過分析30Mn鋼與27Mn Cr鋼的合金成分、管徑規格對熱處理工藝性能的影響，從淬火溫度、回火溫度、保溫時間、冷卻速度等方面采用對比分析法得出30Mn鋼調質P110鋼級油管的工業化熱處理生產工藝：淬火溫度925℃、步進周期32 s，回火溫度530℃、步進周期32 s，外淋水量1 300 m3/h、外淋時間12 s，內噴水量350 m3/h、內噴時間11 s。

       

      Abstract: Based on Ac1, Ac3and Mstemperatures as determined with the CCT curve of the 30Mn steel, and the heat treatment process for the quenched-tempered 27MnCr P110 pipes, the effects by the alloy elements of the 30Mn steel and the 27MnCr steel as well as the steel pipe sizes on performance of the heat treatment process are analyzed. Furthermore the comparative analysis method is used to set up the industrialized heat treatment process for the said P110 oiltubing, involving such aspects as quenching temperature, tempering temperature, holding time and cooling speed.The process parameters include quenching temperature:925℃, and walking beam cycle:32 s;tempering temperature:530℃and walking beam cycle:32 s;external spray water volume:1 300 m3/h and spraying time:12 s;and internal spray water volume:350 m3/h, and internal water spraying time:11 s.

       

      • HTML全文

    /

    返回文章
    返回