錐形輥穿孔機導板的優化設計

Optimized Design of Cone Type Piercer Guide Shoe

摘要: 結合某公司穿孔機實際情況，從軋輥和導板的空間幾何入手，重點介紹了導板設計的數學方法。通過計算導板變形區長度、導板出入口斜面斜角及導板寬度等基本參數，認為由數學公式法確定的導板基本尺寸比經驗法更科學，導板孔型封閉性更好，在生產薄壁管時能有效防止鏈帶或破尾。

Abstract: Based on relevant actual circumstances of the piercing mill located a certain domestic company, and starting with the space geometry of the roll and the guide shoe, the mathematic method for designing the guide shoe is mainly described.The basic parameters such as the deformation zone length, the inlet obliquity and the oblique angle, and the width of the guide shoe are calculated.As a result, it is identified that the basic dimensions as determined with the mathematic formula are more scientific than those as obtained with the empiric method.Such basic dimensions ensures a better closure of the guide shoe groove, which can prevent chain band or tail end breaking in case of production of light-wall pipes.