埋弧焊管酸洗樣品參數測定系統的研發

R & D of Parametric Measuring System for Etching Test Specimen of SAW Pipe

摘要: 介紹了有別于傳統的酸洗樣品截面參數測定方法——計算機軟件測定法，包括酸洗樣品圖像預處理程序模塊的設計，內外焊縫寬度、深度、余高、熔寬比、熔深比軟件測量方法，內外焊縫側面角度、內外焊縫焊偏量和重合量的測量原理等。新開發的測定系統能提高測量的準確性、便捷性及樣品參數的可存儲性，減少酸洗樣品前期酸洗及打磨的時間，并能解決測定誤差大等問題。

Abstract: Described in the paper is an unconventional measurement method for sectional parameters of the etch test specimen，i.e.，the computer software measurement method，covering design of program modules for preprocessing of etch specimen image，software measurement of width，depth，excess metal，pool width ratio and pool depth ratio of both outer and inner welds，and measurement principles for side angles and deviation and overlap of outer and inner welds，etc. The newly-developed measurement system will enhance operation accuracy and convenience，and storage capacity of specimen data，shorten time for etching and grinding of the specimen，and solve problems like large error.