中直徑ERW機組單卷和連續生產工藝的優缺點分析比較（下）

Analysis and Comparison Concerning Advantages and Disadvantages of Single-forming Process and Continuous Forming Process for Medium-sized ERW Pipe Mill（PartⅡ）

摘要: 對中直徑ERW機組是采用單卷生產工藝還是連續生產工藝,在國內焊管界存在較大的意見分歧。從產品規格、技術先進性、年生產能力、金屬收得率、產品質量、能源消耗、投資等多個方面對單卷生產工藝和連續生產工藝進行分析比較,認為中直徑ERW機組采用單卷生產工藝比連續生產工藝更具有優勢,建議在建設中直徑ERW機組時多采用單卷生產工藝。

Abstract: In domestic weld-pipe industrial circles,there exists a debate concerning a proper choice for the ERW pipe mill to be made between the single-forming process and the continuous forming process.Analysis and comparison respecting to these two processes are made in terms of product lines,technological advancement,annual capacity,yield,product quality,energy consumption and investment scale,etc.As a result,it is concluded that the single-forming process will enable the ERW mill to be more technologically superior than it would be in case of the continuous forming process,and accordingly it is proposed for future ERW mill line builders to adopt the single-forming process as the most possibly alternative.