通化硕抠家具有限公司

    高級檢索

    淬火溫度對25Mn2V鋼組織與性能的影響

    Effect by Quenching Temperature on Microstructure and Properties of 25Mn2V Steel

    • 摘要: 采用拉伸試驗、硬度試驗和金相分析等方法，研究了25Mn2V鋼在不同溫度（850，880，910，950，1 000，1 050℃）淬火+600℃回火后的力學性能和顯微組織。結果表明：25Mn2V鋼調質處理淬火溫度為910℃時，其力學性能最高；但當淬火溫度達到950℃時，鋼材淬火組織明顯粗化，力學性能下降。

       

      Abstract: Investigated are the mechanical properties and microstructures of the 25Mn2V steels as quenched at different temperatures（850，880，910，950，1 000 and 1 050℃）and tempered at 600℃by means of tensile test，hardness test and metallographic test.The test results show that the 25Mn2V steel presents maximum mechanical properties after being quenched at 910℃.However，along with the quenching temperature is going up to 950℃，its after-quench microstructure is obviously getting coarsened，and its mechanical properties are getting decreased.

       

      • HTML全文

    /

    返回文章
    返回