通化硕抠家具有限公司

    高級檢索

    雙相鋼和鎳基合金腐蝕試驗對比分析

    Comparative Analysis on Results from Corrosion Tests of Dual Phase Steel and Nickel-base Alloy

    • 摘要: 針對H2S、CO2、Cl-同時存在的高溫、高壓腐蝕環境,選擇22Cr、25Cr雙相不銹鋼和028鐵-鎳基合金、G-3鎳基合金進行對比試驗,分析Cl-質量濃度、溫度、液體流動等因素對各種耐蝕合金管材發生均勻腐蝕與點蝕的腐蝕速率影響。結果表明:在Cl-質量濃度小于120g/L時,雙相鋼具有較好的耐腐蝕性能,可作為油管和油層套管廣泛使用;當Cl-質量濃度大于120g/L時,鐵-鎳基合金與鎳基合金具有良好的耐腐蝕性能,此時雙相鋼僅可作為油管進行有限壽命設計使用。

       

      Abstract: Addressing the hi-temperature and high-pressure corrosive service conditions involving the coexistence of H2S,CO2 and Cl-,comparative tests are conducted to the 22Cr and 25Cr dual phase stainless steels,and the 028 ferronickel-base alloy and G-3 nickel-base alloy.The elements like Cl-concentration,temperature and liquid mobility etc.which influence the velocity of general or spot corrosion of different anti-corrosion alloy tubular products are analyzed.The test results demonstrate that when Cl-mass concentration is less than 120 g/L,the dual phase steel possesses rather fine corrosion resistance,and can be widely used as the material to produce the tubing or the oil string casing,and when Cl-mass concentration is higher than 120 g/L,the ferronickel-base alloy or the nickel-base alloy possesses satisfactory corrosion resistance,whereas the dual phase steel can be only used to produce tubings with a limited service span as designed.

       

      • HTML全文

    /

    返回文章
    返回